Ella Zala Texture 3D Nail Art Gel — 15g
NEW
Ella Zala Texture 3D Nail Art Gel — 15g
Ella Zala Texture 3D Nail Art Gel — 15g
Take your nail art to the next dimension with the Ella Zala Texture 3D Nail Art Gel. This thick, UV/LED gel is designed to hold its shape after curing, making it the perfect medium for creating stunning raised, tactile nail art effects that last.
What can you create with it?
- Brush stroke & feather textures — Apply a thin layer to the nail and drag your brush through the gel, or pick up a small amount and create organic, flowing strokes directly on the nail. Cure, then buff over with your favourite chrome pigment to bring the texture to life — or skip the powder entirely for a beautiful clear raised design.
- Stamping — Apply a thin, even layer onto your stamping plate, scrape back, and pick up the design with your stamper. Transfer onto the nail and cure. The gel captures fine detail beautifully — add your favourite chrome and watch the design come to life.
- Mirror Chrome & Holographic — Because Texture 3D gel cures without a tacky layer, it holds chromes exceptionally well. Buff your chosen powder directly onto the raised design for a bold metallic or holographic finish. You can also mix pigments, chromes, or aurora powders directly into the gel for coloured effects.
How to use:
- Apply your base colour and cure. Pro Tip: For an isolated chrome effect, apply a coat of PN Stain Resistant Top Coat, cure, wipe, and buff the surface — this prevents the chrome from adhering to the surrounding nail.
- Apply Ella Zala Texture 3D gel using your preferred technique (brush art, stamping, etc).
- Cure under the PN Specialty Dual Cure Lamp for 60 seconds, or 60 seconds (405nm) / 2 minutes (365nm) with other lamps.
- Apply your chosen chrome, aurora, or holographic powder over the cured texture, then seal with your preferred PN top coat.
Removal: This is a soak-off gel — simply break the seal with a light buff, then soak off in acetone.
15g | UV/LED Cure | Soak-Off | Compatible with all gel systems
(EZTEXTURE)
Ella Zala Texture 3D Nail Art Gel
This is a quick-reference summary for salon use, pulled from the manufacturer's full Safety Data Sheet (SDS). It is not a replacement for the SDS. Supplier: Planet Nails Distribution Pty Ltd, 8 Conara Road, Kunda Park QLD.
Hazards
- May cause an allergic skin reaction
- Causes skin irritation
- Causes serious eye irritation
- May cause respiratory irritation
Ingredients
| Ingredient | Concentration | Key Hazard |
|---|---|---|
| Acrylates Copolymer | 65.9% | Film former; low-moderate hazard |
| Isobornyl Methacrylate | 19.5% | Monomer; skin/eye irritant; sensitiser |
| Hydroxypropyl Methacrylate | 3.0% | Monomer; skin/eye irritant; sensitiser |
| Silica | 8.4% | Thickener; avoid inhaling dust |
| Trimethylbenzoyl Diphenylphosphine Oxide (TPO) | 3.1% | Photoinitiator; skin/eye irritant |
| BHT | 0.017% | Antioxidant; low hazard |
First Aid
Eyes: Rinse face and flush immediately with plenty of water for at least 15 minutes, occasionally lifting eyelids. Remove contact lenses if present. Seek medical attention if irritation persists. Contact Poisons Information Centre: 13 11 26.
Skin: Remove contaminated clothing. Wash affected area thoroughly with soap and water for at least 10 minutes. Seek medical attention if irritation or rash develops.
Inhalation: Remove to fresh air. Keep at rest in a comfortable position for breathing. Seek medical attention if symptoms persist or are severe.
Ingestion: Do not induce vomiting. Wash out mouth with water. Give small amounts of water if conscious. Seek immediate medical attention. Contact Poisons Information Centre: 13 11 26.
Handling & Protective Equipment
- Wear chemical-resistant gloves (neoprene or PE film equivalent) and protective clothing (e.g. cotton overalls)
- Wear safety glasses or chemical splash goggles; full face shield in high-splash environments
- Avoid breathing vapours or mist; use local exhaust ventilation if needed
- Do not heat or spray. Keep away from heat, sparks, open flame, direct sunlight and UV light
- Store at or below 26°C in a cool, well-ventilated area; keep containers tightly sealed
This summary reflects everyday salon use. The full SDS also covers scenarios such as bulk storage, large spills, and transport, which do not typically apply in a salon setting.
