Puggle Bundle – Liquid Hard Gel Builder in a Bottle
Get the 3 pack - Clear, Petal and Linen
NEW
Puggle Bundle – Liquid Hard Gel Builder in a Bottle
Get the 3 pack - Clear, Petal and Linen
The PUGGLE Bundle gives you all three colourways in one go — Clear, Linen, and Petal.
PUGGLE is a hard gel builder in a bottle. It carries the same permanent, file-off strength as PUG hard gel, but in a thinner, honey-like consistency that flows from the brush, self-levels beautifully, and on the right client, can deliver a finished result with little to no filing at all.
Each bottle is 20ml with a wide-neck design and oval brush head for clean, precise placement right from the cuticle area.
HEMA-free and TPO-free. Formulated in the EU to EU cosmetic regulations.
What's in the bundle
- Puggle Clear — your go-to for natural overlays, tip extensions, and encapsulation
- Puggle Linen — a neutral, skin-toned builder for blended, natural-looking results
- Puggle Petal — a soft, rosy tint for a hint of colour in the structure layer
Why bundle? Having all three means you can match your builder to the client's skin tone, use Clear for encapsulation work, and switch between them as your service menu grows. It's the complete PUGGLE setup from day one.
Recommended base: Clear Lastik, Lastik HF, or Stick 'n Float.
(PUGG3P)
Salon Safety Summary
PUGGLE Hard Gel Liquid Builder
Hazards
- Causes skin irritation
- May cause an allergic skin reaction
- Causes serious eye irritation
- Harmful to aquatic life with long lasting effects
Ingredients
| Ingredient | Concentration | Key Hazard |
|---|---|---|
| Aliphatic Urethane Methacrylate | 35–40% | Skin & eye irritant |
| Bis-HEMA Polyneopentyl Glycol Adipate/IPDI Copolymer | 30–35% | Skin & eye irritant |
| Trimethylolpropane Trimethacrylate | 10–15% | Harmful to aquatic life |
| Isobornyl Methacrylate | 5–10% | Skin/eye irritant, respiratory irritant |
| Hydroxypropyl Methacrylate | 5–10% | Allergic skin reaction risk |
| Ethyl Trimethylbenzoyl Phenylphosphinate (photoinitiator) | <1% | Allergic skin reaction risk |
First Aid
Eyes: Rinse with plenty of water for at least 10 minutes. Remove contact lenses if present. Seek medical attention if symptoms persist.
Skin: Wash with plenty of soap and water for at least 10 minutes. Remove contaminated clothing. Seek medical attention if irritation, rash, or allergic reaction develops.
Inhalation: Move to fresh air. Seek medical attention if symptoms persist.
Poisons Information Centre (Australia): 13 11 26 (24 hours)
Handling & Protective Equipment
- Wear chemical-resistant gloves (nitrile) at all times when handling
- Wear safety glasses or goggles where splashing is possible
- Avoid skin contact with uncured product — use tools, not bare fingers
- Ensure good ventilation at the workstation
- Wash hands after handling, before breaks, and before eating or drinking
- Do not reuse empty containers — residue may still be hazardous
